Recalls: Scuba Diving

This recall involves all Aqua Lung buoyancy compensator vests with SureLock II rubber handles attached to the weight pockets, including those with SureLock II handles that were replaced in the previous recall. The handles are gray rubber, measure about 2 inches tall by 4 inches wide and extend from the forward end of the ditchable weight pockets. SureLock II handles were installed in most Aqua Lung and one model of Apeks buoyancy compensators including: all discontinued Black Diamond, Pro QD and Pro QDi3 models with serial numbers lower than BB408620. The recall also includes all Apeks Black Ice, Axiom, Axiom i3, Balance, Dimension, Libra, Lotus, Pearl, Pearl i3, ProLT and Zuma models with serial numbers lower than BB408620. The buoyancy compensator's model name is embroidered on the inside back pad or on the right lobe. "Sure Lock" is molded into the back of the weight pocket. The serial numbers are located on a tag under the back pad of the buoyance compensator or inside the pocket. Earlier models could have the number printed on a tag behind the hook and loop inflator hold down on the left shoulder. Read more.

This recall involves the Aladin2 wrist dive computer that monitors depth, dive time, decompression status and temperature. The computer is 3 inches by 3 inches, rectangular, black, and mounted on a black wristband. SCUBAPRO is stamped on the top of the face frame and Aladin2 is printed in white on the bottom of the face frame. The serial number is stamped in white on the back of the unit and ends with 003. Read more.

The recalled black rubber high pressure air hose is used with submersible pressure gauges and dive computers. The hose has silver fittings on both ends and "5000 PSIG PRESSURE TESTED - MADE IN THE U.S.A," the batch code "1812" and the product code are printed on it. The hoses were sold separately and as a component of the Cobra, Cobra 3, SM-36 model pressure gauge and gauge combos, and with the Vyper and Zoop model dive computers or analog pressure gauges when purchased as combos. Read more.

The recall includes Hollis brand DG03 dive computers with serial numbers 100 through 1142 that may be used with integrated transmitters that monitor tank pressure. The round black 2-1/2 inch diameter computer has a digital screen and is worn on the diver's wrist like a watch. The name of the product, Hollis DG03, is printed on the front of the unit and the serial number is printed on the back of the unit. These computers allow scuba divers to measure the time and depth of a dive. Only dive computers with software labeled Revision 1A, viewed on the computer's display are included in the recall. Read more.

This recall involves DiveAlert and DiveAlert PLUS scuba dive signaling devices with model numbers DA2, DP2 or DV2. The signaling device is attached to the diver's buoyancy compensator device (BCD) power inflator/alternate regulator system by a chrome-plated brass coupling and is used to activate a loud surface horn or an underwater percussion noise to alert others in the event of a diver's emergency. The devices are also used in non-emergencies to get the attention of the pickup boat or other divers. The DA2 is black with an orange button, the DP2 is black with a gray knob and red button and has DiveAlert PLUS printed on it, and the DV2 is black and red. They can be used with Aqualung AirSource, Oceanic Air XS, Aeris Air Link and Mares Air Control regulator/inflators. Only these signaling devices without any stamped writing on the coupling's collar are included in this recall. Read more.

The recalled air hoses are high-pressure scuba air hoses with a black, smooth rubber outer covering. They are about five millimeters in diameter and 32 or 36 inches long. These hoses connect the regulator to the tank pressure gauge. The phrase "Scuba Diving High Pressure hose I.D. 3/16 (4.76 mm) W.P. 5000 PSI Exceeds SAE 100RT braid with Kevlar fiber from Dupont" is printed in white lettering on the hose's outer covering. The hoses have metal fittings on each end - one female fitting and one male fitting. "CE EN 250 230" is stamped on the female fitting and one of the following production date codes is on the male hex head fitting: T1011, T1111 or T0312. Read more.

This recall involves all Aqua Lung buoyancy compensators with SureLock II rubber handles attached to weight pockets, including the following models: Axiom, Axiom i3, Balance, Black Diamond, Dimension, Libra, Lotus, Pearl, Pearl i3, Pro LT, Pro QD, Pro QDi3 and Zuma buoyancy compensators. The SureLock II handles are gray rubber and measure about 2 inches tall by 4 inches wide. The buoyancy compensator's model name is embroidered on the inside back pad or the weight pocket's right lobe. "SureLock" is molded into the back of the weight pocket.

This recall involves Martinique Jr. single paned, tempered glass youth snorkeling masks sold in a set with snorkel and fins. The masks feature a silicone face skirt, strap and adjustable buckles. The mask is blue with a silver accent piece that frames the tempered glass lens. The U.S. Divers logo is on the upper bridge of the mask as well as inset on the tempered glass lens. The lens is also labeled as tempered. The buckles are each printed with the U.S. Divers "wave" logo.

The recalled air hoses are high-pressure scuba air hoses with a black, smooth rubber outer covering. They are about half a centimeter in diameter and 32 or 36 inches long. These hoses connect the regulator to the tank pressure gauge. The phrase "Scuba Diving High Pressure hose I.D. 3/16" (4.76 mm) W.P. 5000 PSI Exceeds SAE 100RT braid with Kevlar fiber from Dupont" is printed in white lettering on the hose's outer covering. The hoses have metal fittings on each end. "CE EN 250 230" is stamped on the female side of the fitting and "12Q1" on the male side. Read more.

The recalled air hoses are black braided high pressure scuba air hoses. The hoses measure about one centimeter in diameter and vary in length from 6-inches to 40-inches. These hoses attach to the regulator first stage and are intended for use with the submersible pressure gauge (SPG's) that indicate the air pressure in the scuba diving tank. These recalled hoses were sold under the Phantom and Mesh Flex brand names printed only on the product packaging. The air hoses have production date codes stamped into the metal fitting that attaches to the regulator with the following codes: Read more.