Recalls: Gardening and Landscaping

This recall involves Mountain Safety Research Operator™ T, Operator™ D, and Responder™ avalanche rescue snow shovels. Lock buttons on the lower shaft connect the metal shovel blade to the metal shaft. Recalled shovels have a slit on either side of the lower lock button. The shovels measure about 32 to 34 inches long. The blades are red or yellow in color and the handles are gray. "Mountain Safety Research" is printed on the shaft of the handle. "MSR" is printed on the front of the shovel blade. Read more.

The recalled Japanese Axe M has item number R-061 printed on the back page of the included manual. The black axe head measures 5-3/4 inches high by 4 inches wide and weighs 2 pounds. The axe handle measures 14 inches long and is made of light-colored maple. A small black snow flake (asterisk) is burnt into the handle near the hole at the end of the handle. The handle has a small hole near the end, which is used for hanging the axe. The axe was sold with a white leather holder for the axe head that attaches with a snap strap. Read more.

The trimmers are used in residential and professional applications for cutting grass and light brush. The cutting attachments include a trimmer head and metal blade. The trimmers are about 72 inches long and up to 28 inches wide. They are red and gray with either a bike or loop handle configuration. Three models are recalled in two engine sizes measured in cubic centimeters. They are 36cc models 8371 S and 8371 T, and a 40.2cc model 8421 T engine displacement. The brand "efco" and model number are printed on the front of the engine and the brand name also appears on the wand. Read more.

This recall involves Fiskars Titanium Bypass Lopper shears with model number 6954. The lopper shears have 32-inch dark orange steel handles and black rubber grips with a gray strip. Plastic gears connected to the pruning blades allow the consumers to open and close the pruning blades by moving the handles. "FISKARS" is printed on one handle and product identification information, including model number 6954, is printed on a label on the opposite handle above the barcode. Read more.

This recall involves All Power brand single stage snow throwers. The snow throwers are black and yellow and have a red cap on the gas tank. They have a 20-inch wide snow clearing width and an 87cc, 4-cycle engine. The model number of the recalled snow throwers is SB044P which is printed on a yellow and black sticker located on the top of the unit with the phrase "20 Inch Clearing Width." Read more.

This recall involves twelve models of Hitachi Koki and Tanaka-brand hand-held grass trimmers. The gasoline-powered trimmers have either a green engine cover (Hitachi) or orange (Tanaka). The Hitachi or Tanaka logo is printed on the circular plate on the starter pull housing. Model and serial numbers are also located on the circular plate. Trimmers included in the recall have one of the following model numbers and have a serial number that begin with J, P or a number: Brand Model Number Hitachi CG22EAB(SLP) CG22EAD(SLP) CG22EAS(SLP) CG24EASP(SL) CG27EASP(SL) Tanaka TCG22EAB(SLP) TCG22EAD(SLP) TCG22EAS(SLP) TCG24EASP(SL) TCG27EASP(SL) TCG40EAS(LP) TCG40EAS(P) Read more.

The trimmers are used in both residential and professional applications for cutting grass and light brush. The cutting attachments include a trimmer head and metal blade. The trimmers are about 72 inches long. They are colored red and gray with either a bike or loop handle configuration. Three models are recalled in two engine sizes measured in cubic centimeters. They are: 36cc models 8371 S and 8371 T, and a 40.2cc model 8421 T engine displacement. The brand name "efco" and model number are printed on the front of the engine and the brand name also appears on the wand. Read more.

This recall involves 19 models of John Deere 1000, 2000, 3000 and 4000 series compact utility tractors manufactured between February 2013 and July 2013. The tractors are green and yellow with a foldable black, metal rollover protection bar that extends above the operator's head. The model number is on the hood. The serial number is located on the right hand side of the frame above the front axle. Compact utility tractors with serial numbers in the following ranges are included in this recall: Model Number Vehicle Identification Number Ranges 1023E 1LV1023EXXX310006 to 1LV1023EXXX310083 1025R 1LV1025RXXX111788 to 1LV1025RXXX116214 2025R 1LV2025RXXX110121 to 1LV2025RXXX110202 2032R 1LV2032RXXX110008 to 1LV2032RXXX110283 2320H 1LV2320HXXX712151 to 1LV2320HXXX712593 2520H 1LV2520HXXX811702 to 1LV2520HXXX811703 2720H 1LV2720HLCH511543 (Only) 3320H 1LV3320HXXX910198 to 1LV3320HXXX910700 3320P 1LV3320PXXX910129 to 1LV3320PXXX910299 3520H 1LV3520HXXX910239 to 1LV3520HXXX910579 3520P 1LV3520PXXX910098 to 1LV3520PXXX910188 3720H 1LV3720HXXX910181 to 1LV3720HXXX910429 4120H 1LV4120HXXX916152 to 1LV4120HXXX916350 4120P 1LV4120PXXX916013 to 1LV4120PXXX916014 4320H 1LV4320HXXX916166 to 1LV4320HXXX916420 4320P 1LV4320PXXX916036 to 1LV4320PXXX916112 4520H 1LV4520HXXX916127 to 1LV4520HXXX916276 4520P 1LV4520PXXX916034 to 1LV4520PXXX916135 4720H 1LV4720HXXX916129 to 1LV4720HXXX916919 Read more.

The recalled snow blower is 24-inches wide and comes in orange with black. Recalled products have the model number 920014 and serial numbers ranging from 100,000 through 119,039 that can be found on an Ariens-brand label on the lower back panel of the product with the warranty code. There is also a Briggs & Stratton engine model number 13D1370110 F1 labeled on the side of the engine with the serial number range from 12053000000 through 12071699999. Engines with a circular black marker dot located on the right side of the engine base, below the electric starter and just above the oil drain plug, have already been inspected and are not part of this recall.

This recall involves ECHO Bear Cat brand hydraulic log splitter with model numbers LS27270 and LS27270T, with a date code of 012908 stamped on the hydraulic cylinder. The model number is printed on the main beam of the log splitters. The date code is stamped on the hydraulic cylinder near the capped end. The log splitters are black and orange with ECHO Bear Cat printed on the hydraulic cylinder. Read more.