Recalls: Fire or Smoke Alarms
This recall involves Bosch's Radion wireless round smoke alarms installed as part of Bosch security systems. Bosch security alarm systems use a control keypad labeled "Bosch" on the front surface. The alarms are made of white plastic and measure 5.6 inches across and 2.4 inches high. The alarms have a Bosch label on the back with "RFSM-A," a bar code with "F01U263962" and a 17-digit serial number starting with 0922320XXX. The XXX in the 8th through 10th positions of the serial number designates the date code. Only alarms with date codes 001 through 458 are included in the recall. Read more.
This recall involves the SBGA-34 audible base that is affixed to ceiling-mounted smoke detectors in order to sound an alarm when the fire alarm system is activated. The audible base has part number S54370-F13 and date codes 0113 through 2314 in a WWYY format printed on a white label on the back of the unit part affixed to the wall. "MODEL SBGA-34" is printed on a blue label also affixed to the back of the device. The base is off-white and measures about 6 inches in diameter. The audible base is used with the following fire detectors: • Cerberus PRO models (HI921, OOHC941, OOH941, OH921, OP921) • Desigo Fire Safety models (FDOOTC441, FDOOT441, FDO421, FDOT421, FDT421) • H-Series (HFP-11, HFPT-11, HFPO-11) • Faraday 87XX-Series, models (8713, 8712, 8710) The audible base and fire detectors are used with the following alarm systems: • Siemens model FireFinder® XLS via DLC 6312 Device Loop Card • Siemens model FS -250 • Desigo model FC2005, (50-point panel) • Desigo model FC2025, (252-point system) • Desigo model FC2050, (504-point system) • Cerberus PRO FC901, (50-point panel • Cerberus PRO FC922, (252-point system) • Cerberus PRO FC924, (504-point system) • Faraday models MPC-600 and MPC-7000 Read more.
This recall involves Kidde residential smoke alarm model i12010S with manufacture dates between December 18, 2013 and May 13, 2014, combination smoke/CO alarm i12010SCO with manufacture dates between December 30, 2013 and May 13, 2014, and combination smoke/CO alarm model KN-COSM-IBA with manufacture date between October 22, 2013 and May 13, 2014. They are hard-wired into a home's electric power. The i12010S and i12010SCO come with sealed 10-year batteries inside. The KN-COSM-IBA model has a compartment on the front for installation of replaceable AA backup batteries. The alarms are white, round and measure about 5 to 6 inches in diameter. Kidde is engraved on the front of the alarm. Kidde, the model number and manufacture dates are printed on a label on the back of the alarm. "Always On" is also engraved on the front of alarms with sealed 10-year batteries. Read more.
This recall involves thirty-three models of the 400 and 500 series Edwards (ESL)-branded and Interlogix smoke detectors hard-wired into a security system. Edwards and Interlogix smoke detectors are identical. The 2-wire or 4-wire detectors are round, white and measure 6 inches across by 2 inches high. The smoke detectors were made for professional installation and used primarily in commercial buildings, schools, hotels/motels, apartments, dormitories and homes as part of the fire alarm system. Recalled units have date codes 13084 through 14059 with the first two digits representing the year, for example: 13 for 2013 and 14 for 2014; and the last three digits representing the day of the year, for example: 084 is the 84th day of 2013, which is March 25, 2013. The initials ESL, the date code and one of the following model numbers are printed on a label on the back of the detector's cover and on the product's packaging. 400 series: 429AT, 429C, 429CAD, 429CRT, 429CST, 429CT, 429CTAD, 449AT, 449C, 449CRT, 449CSRH, 449CSRT, 449CST, 449CSTE, 449CT and 449CTE. 500 Series: 511C, 518C, 521B, 521BXT, 521B-10PKDMP, 521B-10PKG, 521BXT-10PKG, 521BXT-DMP-10PKG, 528B, 528CRXT, 541C, 541C-10PKG, 541CXT, 541CXT-10PK and 548C. Read more.
This recall includes all Nest Protect Smoke + CO alarms. The alarms are made of black or white plastic and are about 5.25 inches square with rounded corners and about 1.5 inches deep. The word "nest" is on a large button on the face of the alarm. Consumers can enable the alarms to be controlled by a computer or a smartphone over a wireless network. The alarms have a Nest Wave feature, which allows users to temporarily silence some alerts or cancel a manual test by vigorously waving an arm near the unit that triggered the alarm. Nest Protect Smoke + CO alarms came from the factory with the Nest Wave feature enabled and with the slider button in the "On" position in Nest Protect Settings. Read more.
This recall involves System Sensor's reflected beam smoke detectors with model number BEAM1224S and date codes 2111 through 3053. The YMMW format date codes stand for (2111) 2012-November-1st week of Nov. through (3053) 2013-May-3rd week of May. The detectors are ivory and black and measure 10 inches high by 7½ inches wide. The model number and date code are printed on a label on the back of the detector's cover and on the product's packaging. The reflected beam smoke detectors were used primarily in commercial buildings as part of the fire alarm system. Detectors used with acceptable power supplies, as listed on the company website, do not need to be replaced. Read more.
The recalled exit signs have emergency lights fixed at either end with "EXIT" in red or green in the center. The fixtures are installed in commercial buildings, such as hotels and office buildings. Affected model numbers can be found on a label affixed inside the fixture housing and on the outside of the packaging, and include: LHQM LED G M6, LHQM LED R M6 and LHQM LED R HO M6. Affected models have the following date codes on the inside fixture housing: 1003S10, 1004S10 or 1005S10. Dates on the packaging carton include any calendar dates in March, April or May 2010. Read more.
The recalled fire alarm panel is the Simplex 4100U-NXP panel configured for third party monitoring and running software revision 14.01. The words "Simplex," "4100U" and "Fire Control" appear on the fire alarm's front panel. The software revision number can be identified by pressing the "Menu" key on the panel keypad, selecting "Show Software Revision Level" and pressing "Enter." Read more.
This recall involves Kidde dual sensor smoke alarms model PI2000. The alarms can be identified by two buttons, “HUSH” and “PUSH AND HOLD TO TEST WEEKLY,” which are located on the front/center of the alarm. The model number and date code are on the back of the smoke alarm. Only date codes 2008 Aug.01 through 2009 May 04 are included in this recall. Read more.
