Recalls: Exercise Equipment
This recall involves Fitness Gear resistance tubes used as upper and lower body workout equipment. The latex tubes were sold in blue, gray, green, orange, purple and red with gray handles. The tubes range in resistance from 5 pounds to 30 pounds and were sold individually and in kits of three, four or five resistance tubes. The resistance level is marked on the black strap between the handle and the tube. The recalled model numbers are: STA00560, STA00561, STA00562, STA00563, STA00564, STA00565, STA00566, STA00567, and STA00568. Read more.
This recall involves Matrix ClimbMill stair-step exercise machines with the following frame serial numbers: Serial Numbers CS17111100102 - CS17120901766 CS21130800080 - CS21130500062 CS22130602881 - CS22130602863 CS23130800001 - CS23140703749 CS23B131100001 - CS23B140701050 CS24140700001 - CS24150702803 CS24C140800001 - CS24C150200900 CS24H150100001 - CS24H150500049 Only ClimbMills that have a right handgrip with the words "STOP" and "Pause" printed on them are included in this recall. The frame serial numbers are located on the bottom front of the base near the power switch. The ClimbMills are black and gray with Matrix printed on the side of the machine. These four-step exercise machines are used in commercial fitness facilities such as health clubs, hotels, apartment complexes, rehabilitation centers, schools, and municipal facilities. Read more.
This recall involves the Olympic Decline free weight bench with model numbers 16060, 16061, 16062 and 16063. The bench consists of a steel frame with an upholstered pad on which the user rests his/her back, and a rack on which the user can engage a 7-foot bar with its weight plates when the user completes the exercise routine. On all of these models the upholstered pad is configured at a 15 degree angle so that, in use, the user's back and shoulders are lower than the user's thighs and knees. A decal bearing the unit's model and serial number is affixed to the tube near where the user's feet are placed when using the unit. The recalled benches have serial numbers C1208 through K0915, which represent manufacture dates of December 2008 through September 2015. "Cybex" is printed on the benches. Read more.
This recall involves the Rogue Fitness MobilityWOD Door Anchor. The anchor is used to anchor elastic bands for use in stretching and mobility exercises. The door anchor has a red plastic tab anchor with "ROGUE" embossed on one side attached to a black nylon strap with a metal ring and carabiner on the other end. The anchor measures about 8 inches long by 1.5 inches wide. Read more.
This recall involves five models of the Matrix Fitness series strength training machines with chrome frames, stacked weights, overhead pulleys, and some with black or blue vinyl seats and thigh supports. Models include VY-6021 Lat Pulldown, VY-6042 Bicep/Triceps Press, VY-6046 Lat Pulldown/Low Row, VY-6099 Total Body Trainer, and the J7021 Special Order Lat Pull. "Matrix" and the model number are printed on a white sticker at the base of the machines. They are used in commercial fitness facilities such as health clubs, hotels, apartment complexes and rehabilitation centers, schools and municipal facilities. Read more.
This recall involves the SKLZ Recoil 360™ All-Position Resistance Trainers, which is a leash-type device that provides resistance during exercise. The resistance trainer consists of a belt, an 8-foot flexible cord attachment leash, a safety handle and a storage bag. "SKLZ" followed by an arrow is printed on the belt. Users wear the belt, which is connected to the flexible cord. The safety handle, connected to the flexible cord, is held by a coach or partner to provide resistance while the user runs, jumps or shuffles. In lieu of a coach or partners, the safety handle can be connected to a sturdy stationary object like a fence or post. Belts with the arrow before the "SKLZ" are not included in this recall. Read more.
This recall involves Bollinger Fitness Classic and SoftTouch resistance bands with door attachment, model numbers 5771, 5772, 5773, 5774 and 5775. The 4-foot-long resistance bands are made of gray rubber with gray, red, black or blue accents and have black foam handles and a door attachment. A 5-inch-long strap of nylon webbing is looped onto the band with a plastic ball attached or encased that serves as a door anchor. The Bollinger Fitness logo appears on the handles. The model number can be found on the product's packaging. Read more.
This recall involves all Magnum and Matrix Fitness 900 Pro Series multi-station strength training towers used at commercial fitness facilities such as health clubs, hotels, apartment complexes and rehabilitation centers; schools and municipal facilities. The machines involved in this recall were sold in various multi-station configurations. The machines include, but are not limited to, the adjustable pulley, the dual adjustable pulley, the triceps push down and the bicep/tricep pull down. Magnum or Matrix appear on the serial number label at the base of each unit. Read more.
This recall involves TRX dip bars and hammer bars used with TRX S-Frames and Elevated Frames which are used to support TRX exercise equipment. The TRX dip bar for an S-Frame consists of two handles about 18" apart at the base affixed to a 49" bar that attaches to the S-Frame. The TRX dip bar for an Elevated Frame consists of two handles about 18" apart at the base affixed to a 58" bar that attaches to the Elevated Frame. They are used for performing dips and other related exercises. The TRX hammer bar consists of two handles about 16" apart affixed to a 17" bar that attaches near the top of the S-Frame or Elevated Frame and is used for performing pull ups and other related exercises. Read more.
The ElliptiGO 3C, 8C and 11R models are outdoor elliptical cycles used by adults for exercise. It is a scooter-like device that combines an elliptical trainer with a bicycle. The ElliptiGO cycles have an aluminum frame, drive arms, two 20" spoked-wheels, an internally geared hub, front and rear brakes and adjustable-height steering column. All cycles have the word "ElliptiGO" along the outside of the frame. The 3C and 8C model cycles have a "C-Series" decal towards the rear of the frame and aluminum drive arms. The recalled 11R cycles are matte black with white markings and the "11R" decal is found towards the rear of the frame. The serial numbers on all models are located on the frame in front of the back wheel near where the kickstand attaches to the frame. Serial number ranges for the recalled 3C and 8C models are from 11-010-001 through 13-028-102, and for the 11R model from 12-003-069 through 12-020-035. Read more.