Recalls: Gun Accessories

This recall involves the Blackhawk T-Series black gun holster L2C made of molded plastic material. The black holster is designed to be used with Sig Sauer P320/P250 civilian firearms that clip onto the user's belt. "2101213 A" is printed on the outside of the recalled gun holsters. Read more.

This recall involves the DIANA Stormrider Gen 2 Air Rifle with 2-stage adjustable trigger. The recalled products are .177 and .22 caliber, pre-charged pneumatic air rifles that are powered by a compressed air cylinder. "DIANA Stormrider" as well as the caliber and serial number are printed on each affected air rifle. Air rifles with the following item and serial numbers are included in the recall: Recalled DIANA Stormrider Gen 2 Air Rifles Item Numbers 1900001 & 1900101 Serial Numbers 2318220145032949E - 2318229955034368E 2318229955075924I - 2318229955076323I Read more.

This recall involves two models of 0.17 cubic foot capacity electronic handgun safes sold under two different brand names, Union Safe Company and Bunker Hill Security. The recalled safes are dark gray and the SKU number is printed on a permanent label on the door. The brand is printed on the permanent label on the door and molded into the combination touch-pad panel. Brand SKU Union Safe Company 62984 Bunker Hill Security 61581 Read more.

This recall involves all white plastic molded clip-on nocks used in arrows for Ravin brand crossbows. The white arrow nocks were sold separately in a package of 12 and as original equipment with Ravin crossbows and Ravin arrows. The white nocks measure about 0.9 inches long. Read more.

This recall involves TriggerTech carbide triggers, including the Rem 700 Carbide Triggers, the AR15 Carbide Triggers, and the Excalibur, Mission, Killer Instinct, and Parker Crossbow Triggers. The various carbide triggers used in crossbows can be identified by the model number and corresponding serial number or date code. The serial number/date code can be found on the side of the Rem 700 and AR15 triggers, and on the bottom of the Killer Instinct, Excalibur, Mission, and Parker triggers. The recalled products all have carbide rollers. Carbide Trigger Identification Model Serial Number Date Code Rem 700 2088-2090, 6501-7500, 9226-9999, 10000, 12001-12003 BAR001-BAR189, BBR001-BBR005 AR15 N/A ALC001-ALC020, ALS001-ALS017, BAFC001-BAFC007, BALC001-BALC004, BAC001-BAC092, BAS001-BAS034, BBLC001-BBLC019, BBLS001-BBLS003, BBC001-BBC107, BBS001-BBS013, BCS001-BCS002, BCLC001-BCLC001, BCC001-BCC008 Killer Instinct 2121-2160, 2202-2241, 2261-2321, 2326-2358, 2449-2499, 5224-5265, 5269-5270, 5290, 5301, 5307-5365, 5367-5561, 9131-9225 BCK001-BCK032, BEK001-BEK108 Excalibur 2448, 2500, 4113-4332, 4345-4448, 5077, 5088-5180 BAE001-BAE095, BCE001-BCE061, BDE001-BDE029, BFE001-BFE020, BGE001-BGE039 Mission 2086-2087, 2091-2120, 2161-2201, 2242-2260, 2322-2325, 2425-2447, 5181-5222 N/A Parker 2359-2424 N/A Read more.

The GunBox™ is an aluminum, square, clam-shaped case with an RFID scanner with a T-shaped logo on the top center of the box and two USB ports for charging devices. The "RF+Biometric" and "Premier" model boxes include a square fingerprint scanner below the RFID scanner on the top of the box that holds multiple fingerprints. The "Premier" model includes a GPS locator. All of the GunBoxes were sold with RFID wristbands that allow the user to wave their hand above the box to unlock. The recall includes version 01 of The GunBox™ RF, (model GBRF1.0); RF+Biometric, (Model GBBIO1.0); and the Premier, (model GBPREM1.0). The model number and "The GunBox™" are printed on a label on the bottom of the units. Read more.

This recall is for combination lock models of Lockdown� Compact and Large handgun security vaults. The vaults are black, steel cases used to store handguns or other valuables at home, in the car or when traveling. The Compact vault's interior is 5.25 inches wide, 8.25 long and 1.5 inches deep and can store most compact automatics and revolvers. The Large vault's interior is 6.125 inches wide, 9.75 inches long and 1.5 inches deep and can store most full-sized automatics and revolvers with barrels up to 4 inches long. The vaults are lined with foam padding in the top and bottom and are secured by a three-digit combination lock. A label with the words "Lockdown" and "www.lockdownvaults.com" is located to the left of the combination lock. The serial number is located on a paper label on the inside surface of the vault bottom under the foam. Recalled Compact and Large vaults have serial numbers from ST120002600 to ST120006800.

The recalled products are Rivers Edge® Big Foot, Lite Foot and Baby Big Foot tree stands. The tree stands are used for bow and rifle hunting. They are made of metal with a dark gray finish and have black nylon straps with white stitching. The seats are camouflage and black and feature a yellow Rivers Edge logo on the top. The snap-hook assembly is used to attach the stand to trees or poles. Recalled models have the date “2012” on the round ID tag located on the crossbar beneath the seat and do not have an orange dot and an “X” stamped on the snap-hook. The following models are being recalled: Read more.

This recall involves Hatsan Striker air rifles that shoot pellets. The air rifles are available in three styles: black with a gray forearm grip and gray rear grip; camouflage with a black forearm grip and black rear grip; and, brown hardwood with crosshatching cut into the forearm grip and rear grip. They measure 43 inches in length. The air rifles have a black scope and a front sight and a rear sight. “Striker” is printed on the top of the gun’s barrel behind the rear sight. Serial numbers of recalled rifles begin with one of the following sets of numbers: 0511, 0811, 0911, 1011, 0112, 0212, 0312, or 0412. The serial numbers are printed on the air rifle’s barrel block on the left side just in front of the rear sight. Read more.

The recalled hunters' tree stands have the following names and item numbers: Crush Series Perch, number 82069; Crush Series Stoop, number 82070; and Crush Series Ledge number 82071. The tree stands include the main stand platform and seat with a green cinch strap and a tan tree stand hanging strap assembly, which consists of one nylon strap with a hook and an adjustment portion with a metal buckle and a matching nylon tab and a hook. This hanging strap assembly has the recalled item numbers printed on the safety label attached near the buckle. Read more.