Recalls: Home Appliances, Maintenance and Structures
The recall involves DOLMAR PS6400 and PS7900-model chain saws in which the last five digits of the serial numbers are within the following ranges: Read more.
The recall includes Coleman® Gas Grills with model numbers 5100, 5300, 5400, 5600, 6000 and 7700, and Coleman® Patio Heater with model number 5040. The model name and number can be found directly on the front of the grills and on the inside cover of the heaters. Read more.
: The product is marketed under the brand name of Tile Perfect™ Stand'n Seal "Spray-On" Grout Sealer. The date/lot codes are printed on the bottom of the can. All cans with date/lot codes starting with the following six digits are included in the recall: A20985; A30985; A10995; A20995; A30995; A11015; A21015; A31015; A11025; A21445; A31445; A11455; A21455; A31455; A11465; A21465. Units with other date/lot codes have been reformulated and are not subject to this recall. Read more.
The recall involves certain MAC-brand 14.4 Volt and 18.0 Volt 3/8-inch drive cordless drill/drivers. The 14.4 Volt units have part number CDD14438 or CDD14438-Kit and the 18.0 Volt units have Part Number CDD18012 or CDD18012-KIT. The part number can be found on the side of the drill near the logo. Read more.
The recall involves Holmes® models HFH6498-U, HFH6500-U and HFH6500TG-U and Bionaire® model BFH3530-U. The recalled heaters also have date codes beginning with 2604 through 3804 for all units, except for Holmes® model 6500TG-U, which has date codes ranging from 2604 through 4704. The model and date code can be found on the silver label on the back of the unit. The heater fans are 26 inches tall; come in all gray, two-tone gray, or black and gray; and have either the word Holmes® or Bionaire® printed on the front of the base. Read more.
The recall includes DESA Heating Products 10,000 Btu Thermostatically Controlled Compact Classic Hearth Fireplaces that burn propane or natural gas. They have the following model names and number: Vanguard (VMH10TPC & VMH10TNC) and FMI (EFS10TPA & EFS10TNA). They have serial numbers between 015200000 and 017400000. The model and serial numbers are on the end of the shipping carton and on the model data tags inside the lower access door of the compact fireplaces. Read more.
This Alert involves all Kidde 10 lb. dry chemical fire extinguishers manufactured with a black plastic Zytel® nylon valve assembly and a steel cylinder between 1991 and 2000. These units were the subject of Kidde Service Bulletin 007 issued on July 21, 2004. These units were designed for commercial and industrial applications, and the majority of these units were placed into service in factories, plants, businesses and other commercial locations as they require service by a qualified Fire Extinguisher Distributor or Service Organization every 6 years. Some of these units are in use in residential settings. The affected extinguishers have a steel cylinder with a welded neck ring and are between 19 to 21 inches tall as depicted in the image below. This Alert does not apply to Kidde’s smaller 2 1/2 and 5 lb. residential fire extinguishers. Read more.
These silver Inprint™ safe-boxes are about 8-inches long, 6-inches wide and 12.5-inches high and have "INPRINT" written on the top of the safe. They have serial numbers 04470001 through 04470500 printed on the inside back panel near the battery tray. Read more.
Only DeWALT D55143 three-gallon hand-carry oil free air compressors with the following date codes: 200448, 200453, 200502 through 200505, 200508, and 200509 are included in the recall. The date code is printed on the name plate on the rear air tank of the unit. Units marked with an "R" on the end cap of the unit are not included in this recall. Read more.
The recall involves new DeWALT D51844 and D51845 Heavy-Duty 20° Full Round Head Framing Nailers, and new DeWALT Model D51722 Heavy Duty 31° Clipped Head Framing Nailers. The recalled units have the following date codes: 200203, 20024, 200217, 200302, 200304, 200308, 200315, 200325, 200329, 200343, 200403, 200404, 200406, 200407, 200412, 200413, 200415, 200416 and 200417. The location of the date code is shown on the photograph below. The new units have a rework date code of 200449DM, 200450DM, 200451DM or 200452DM on the carton. The recall also involves reconditioned DeWALT D51844R and D51845R Heavy-Duty 20° Full Round Head Framing Nailers, and reconditioned DeWALT Model D51822R and D51823R Heavy Duty 31° Clipped Head Framing Nailers, with date codes 200423 through 200509. The date codes on all of the units are located in the area shown on the photograph below. Read more.