Recalls: Pools and Water Sports
The diving mask is designed to cover the eyes and nose. The mask and strap are made with soft black rubber, with hard rubber around the two glass lenses. "O.M.E.R." appears on the forehead area of the mask in raised letters. The UPS Code 801 773 612 2298 and Omersub MFG Part #603NCF appear on the original packaging. Read more.
This recall involves all Aqua Lung buoyancy compensator vests with SureLock II rubber handles attached to the weight pockets, including those with SureLock II handles that were replaced in the previous recall. The handles are gray rubber, measure about 2 inches tall by 4 inches wide and extend from the forward end of the ditchable weight pockets. SureLock II handles were installed in most Aqua Lung and one model of Apeks buoyancy compensators including: all discontinued Black Diamond, Pro QD and Pro QDi3 models with serial numbers lower than BB408620. The recall also includes all Apeks Black Ice, Axiom, Axiom i3, Balance, Dimension, Libra, Lotus, Pearl, Pearl i3, ProLT and Zuma models with serial numbers lower than BB408620. The buoyancy compensator's model name is embroidered on the inside back pad or on the right lobe. "Sure Lock" is molded into the back of the weight pocket. The serial numbers are located on a tag under the back pad of the buoyance compensator or inside the pocket. Earlier models could have the number printed on a tag behind the hook and loop inflator hold down on the left shoulder. Read more.
This recall involves Sevylor brand River Racer inflatable rubber tubes. The recalled tubes are black, 36 inches in diameter and about 15 inches tall. Each tube seats one person. The tubes have the Sevylor logo and name, and the River Racer logo and name printed in blue on the outer side. Model number 2000014090 is located on the inner side of the tube below the bottom left corner of the English language warning. Read more.
The 1X and the Overdrive 1X control systems are both comprised of a light-weight control bar to control and depower the kite, a set of flying lines and a harness loop/quick release (QR) mechanism. Both products have an orange and black EVA grip and a new QuickLoop™ harness loop/QR. The Recoil™ spring mounted along the depower mainline is used to maintain the position of the trim adjusters. The 1X control system (model number KS51XCSFX) is a fixed length and is available in two sizes: 45 cm and 55 cm. The Overdrive 1X (model number KS5CSSDODO) is adjustable between two bar lengths and comes in sizes: 48-56 cm and 57-62 cm. Model numbers are located on a cloth tab attached to the bungee line restrainers at the end of the bars. Read more.
This recall involves NRS "Chaos Side Cut" helmets used for water sports, including rafting, kayaking, stand-up paddling and canoeing. The helmet's hard shell is available in yellow, red, blue or white. "NRS" is printed on the front and back of the helmet. The recalled helmets have a black "Boa" dial-fit retention harness inside at the back of the helmet. "Boa" is printed on the dial. "Chaos" and PO#39225 are printed on a white sticker inside of the helmet. Helmets with an "Inspected" sticker inside the shell under the Boa dial are not included in this recall. Read more.
This recall involves the Aladin2 wrist dive computer that monitors depth, dive time, decompression status and temperature. The computer is 3 inches by 3 inches, rectangular, black, and mounted on a black wristband. SCUBAPRO is stamped on the top of the face frame and Aladin2 is printed in white on the bottom of the face frame. The serial number is stamped in white on the back of the unit and ends with 003. Read more.
This recall involves all Trident Series 2 ultraviolet sanitation systems for pools. The sanitation systems are a gray tube that stands 32 inches high by 11 inches in diameter. They are plumbed into the pool's water circulation pipes and plugged in or hard-wired into an electrical system. The pool's water runs through the unit and is sanitized by ultraviolet lamps. This is a secondary sanitation system used in conjunction with chemical sanitizers such as chlorine or bromine. "Trident Ultraviolet Corporation," "Series 2" and "UV Ultraviolet Sanitation System" are printed on a black label on the front of the units. "Trident Series 2 Ultraviolet Water Treatment System" and a series of letters for the date code are printed on a silver sticker on the units. Go to www.uvrecall.org to determine if the date code is included in the recall. Read more.
This recall involves all Paramount Trident Series 2 (UV II) ultraviolet sanitation systems. The sanitation systems are a gray tube that stands 32 inches high by 11 inches in diameter. They are plumbed into the pool's water circulation pipes and plugged in or hard-wired into an electrical system. The pool's water runs through the unit and is sanitized by ultraviolet lamps. This is a secondary sanitation system used in conjunction with chemical sanitizers such as chlorine or bromine. "Trident UV II" or "Series 2 Trident Ultraviolet Corporation UV Sanitation System" is printed on a black label on the front of the units. In addition, a silver sticker on the units has the following wording "Paramount Series 2 Ultraviolet Pool Sanitizer System," "Trident Series 2 Ultraviolet Water Treatment System" or "Trident Ultra UV Series 2 Water Treatment System" and a date code of 9/9/2013 or later. Some date codes consist of a series of letters. Consumers with letters in the date code need to go to www.1paramount.com to determine if their unit is included in the recall. Read more.
The recalled black rubber high pressure air hose is used with submersible pressure gauges and dive computers. The hose has silver fittings on both ends and "5000 PSIG PRESSURE TESTED - MADE IN THE U.S.A," the batch code "1812" and the product code are printed on it. The hoses were sold separately and as a component of the Cobra, Cobra 3, SM-36 model pressure gauge and gauge combos, and with the Vyper and Zoop model dive computers or analog pressure gauges when purchased as combos. Read more.
The recalled magnetic gate latches are 10" or 20" models in black or white. They are marked with the "Trident" name and image on the face of the latch body below the key hole. The latch body, which is typically attached to a fence post, contains a knob and a key cylinder on the uppermost portion and a recessed area on the bottom portion designed to engage and retain the striker. The striker, which contains the magnet, is typically attached to the active gate portion of a fence gate assembly, and moves with the gate as it is opened and closed. The Trident Latches are frequently used to secure gates for pools. Read more.
