Recalls: Home Appliances, Maintenance and Structures :: Consumer Recalls

December 15, 2006 Pressure Washers and Air Compressors Recalled By DeVilbiss Due to Fracture and Laceration Hazards

The recalled pressure washers and air compressors were sold under the following brands and model numbers: Read more.

December 15, 2006 Square D Recalls Safety Switches Due to Shock or Electrocution Hazard

The recall includes General Duty 30 and 60 ampere, 240 volt, 1 phase and 3 phase NEMA 3R safety switches. The switches are typically used to control the flow of electricity to outdoor motorized units that are hardwired to a household or business' electrical system such as outdoor air conditioning and heating (HVAC) equipment. The switches contain "ON" and "OFF" positions. The "OFF" position is designed to cut the flow of electricity to an outdoor motorized unit to protect the person who is servicing the unit. The recalled switches have the following date codes and catalog number printed on bottom of the wiring label inside the front cover or on bottom of the package label. Read more.

December 12, 2006 Emerson Electric Co. Recalls Ceiling Fans for Injury Hazard from Falling Blades

The recall involves the "Emerson Designer 60-inch Ceiling Fan." The recalled fans have a 60-inch diameter and come in seven types of finishes including weathered bronze, pewter, antique brass, white, antique white, oil rubbed bronze and brushed steel. The following model numbers are included in the recall and can be found on the base of the fan. Read more.

December 5, 2006 Stanley Security Solutions Inc. Announces Recall of Door Handle Locks, Failure Could Lead to Entrapment in an Emergency

The recalled units include the 5K Light/Medium Duty Lever Series door handle locks. These sets have a brass or stainless steel finish with the word “BEST” embossed below the key whole on the elongated handle. Read more.

November 30, 2006 Trane Recalls Air Conditioners after Incidents of Units Smoking

The recall includes 208, 230 and 265 volt models of the Trane PTEE and PTHE Series Packaged Terminal Air Conditioners (PTACs). They were manufactured from about March 2006 through July 2006. The date code is F06C through F06G, and is written on the unit’s Manufacturer’s Data Plate located behind the molded plastic cover above the power connection. Read more.

November 28, 2006 MTD Southwest Inc. Recalls Troy-Bilt, Craftsman Chain Saws, Breaking Handles Pose Laceration Hazard

These Troy-Bilt and Craftsman brand chain saws are powered by a two-cycle gasoline engine ranging in size from 46cc to 55cc. They are equipped with either an 18-inch or 20-inch bar. There are four Troy-Bilt models affected: 41AY00AR966, 41AY60AR766, 41AY90AR766 and 41AY08AR966. There is one Craftsman "Incredi-Pull" model affected: a 55cc two-cycle gasoline engine with an 18-inch bar and model number 316.350840. The model number of the chain saw is located on the engine casing. Read more.

November 16, 2006 Scott Electric Co. Inc. Recalls Counterfeit Circuit Breakers Due To Fire Hazard

The counterfeit circuit breakers include Square D QO-series models 115, 120, 130, 160, 215, 230, 260, 1515, and 1520. Actual Square D circuit breakers have (a) the amp rating written on the handle in white paint on the front of the breaker; (b) on the side of the breaker, where wire terminal screw is located, the arc shoot opening should have squared corners with the bottom edge of the opening angled up; (c) the mounting clip should be yellow chromate with half of the top of the clip visible; and (d) the Square D insignia should be molded onto the breaker. If your Square D breaker does not match this description, it could be counterfeit. Read more.

November 13, 2006 ANSUL Recalls Fire Extinguisher that Could Fail to Operate

The recall involves K-GUARD® Wet Chemical, FLAG FIRE® KITCHEN ONE® Wet Chemical, FLAG FIRE® Water and SENTRY® Water Fire Extinguishers manufactured and shipped between May 2003 and September 9, 2005. The recall program involves pick-up tube replacements in the following extinguishers: Read more.

November 8, 2006 DeWalt Recalls Framing Saws and Circular Saws for Laceration Hazard

This recall involves DeWalt DW378G and DW378GT 7 ¼-inch framing saws with date codes 200301-49 through 200637-49. The model numbers for the framing saws are located on the side of the housing. The date code is located either on the name plate or under the handle near the power cord exit. Circular saws involved in this recall have model number DC300 with date codes 200601-49 through 200637-49. The model number on the circular saw is located on the name plate on the top of the motor housing. The date code on the circular saw is located on the underside of the motor housing. Framing saws marked with a "V" on the underside of the handle near the cord set and circular saws marked with a "V" on the underside of the motor housing or under the handle where the battery is inserted have already been repaired and are not involved in this recall. Read more.

November 8, 2006 WMH Tool Group Inc. Recalls Wilton Mitre Saws for Laceration Hazard

The recall involves all Wilton-brand, 10-inch Compound Mitre Saws, including models with the Laser Line feature with model numbers 99164 and 99192. The model number is written on a black label on the motor housing. Read more.