Recalls: Pools and Water Sports
The recalled air hoses are high-pressure scuba air hoses with a black, smooth rubber outer covering. They are about half a centimeter in diameter and 32 or 36 inches long. These hoses connect the regulator to the tank pressure gauge. The phrase "Scuba Diving High Pressure hose I.D. 3/16" (4.76 mm) W.P. 5000 PSI Exceeds SAE 100RT braid with Kevlar fiber from Dupont" is printed in white lettering on the hose's outer covering. The hoses have metal fittings on each end. "CE EN 250 230" is stamped on the female side of the fitting and "12Q1" on the male side. Read more.
This recall involves Sportspower Liquid Motion waterslides. Consumers inflate the waterslide with air and spray it with water for sliding. They are used on the ground, not at the pool. The waterslides are blue and yellow and measure about 18 feet long by 9 feet high by 5 feet wide. A "Liquid Motion by Sportspower" logo is printed on the side. Recalled waterslides have item number INF-1375 and UPC 687064031340 located on the packaging. Read more.
This recall includes NK R2 microphones manufactured before September 1, 2012. The recalled product is a microphone designed to be used by the navigator (coxswain) of rowed racing boats to direct the rowers. It is made of a rubber U-shaped base attached to a blue headband. A black metal microphone boom is attached to one end of the U and a cable with a flat, rubber-covered connector is attached to the other end. The microphones are used with the Cox Box and Cox Box Mini voice amplifiers. The NK logo appears on the headband. Recalled microphones have metal booms that are not covered by rubber and do not have a yellow warning tag on the cable. Read more.
The recalled air hoses are black braided high pressure scuba air hoses. The hoses measure about one centimeter in diameter and vary in length from 6-inches to 40-inches. These hoses attach to the regulator first stage and are intended for use with the submersible pressure gauge (SPG's) that indicate the air pressure in the scuba diving tank. These recalled hoses were sold under the Phantom and Mesh Flex brand names printed only on the product packaging. The air hoses have production date codes stamped into the metal fitting that attaches to the regulator with the following codes: Read more.
The high pressure hose is used to monitor cylinder pressure for the air supply in tanks for scuba diving. The hoses have MFX stamped on the hose’s end fitting. They were sold as individual replacement gauge hoses and as cascade hoses and in the following kits and model numbers: Read more.
The inner tube is part of the three-piece Fruit Tutu Bikini swimwear set for teddy bears, which includes a two-piece fruit-print bikini. The inner tube is 9 inches in diameter and pink with white and yellow flowers printed on it. The model number of the swimwear set is 017220 and is located on the price sticker on the "Build-A-Bear" cardboard tag. Read more.
The recalled motors are variable speed swimming pool pump motors with a 6.5 inch diameter steel frame painted black with a square or C-flange mounting. The rating plate is on the side of the pump and "EMERSON. CAT.NO.EVSS3" and " MODEL M63PWBLE-121.H.P. 3.0, S.F.1.15" is printed on the plate. Read more.
The weight harnesses are made of heavyweight nylon and are black in color with gray handles. The DUI logo appears on the pockets. The Weight & Trim System Classic has two small weight pockets on each side. The Weight & Trim System II has one large weight pocket on each side. Systems with large silver stripes on the sides have been inspected or repaired and are not affected by this recall. Read more.
The recall involves various pool and spa drain covers that can be identified by Lawson's name and model information on the cover. The recall involves covers with model numbers: MLD-FGD-1818, MLD-GOD-1818, MLD-SG-1818, FI-SG-181818, FI-SG-181824. Read more.
